1,25‘‘ Feather-Touch Focuser
Product number:
0554046
GTIN/EAN:
4007922041360
WEEE-Reg.-Nr.:
DE 34716369
Product information "1,25‘‘ Feather-Touch Focuser"
Starlight-Instruments Feather-Touch focuser for very precise focusing.
Technical data:
• Length: 48mm to 65mm
• Travel: 17mm
• Diameter: 57mm
• Weight: 350g
Delivered by order:
• 1.25" Starlight-Instruments Feather-Touch focuser
This Feather-Touch focuser allows very fine and precise focusing. The Feather-Touch focuser provides a M35x0.5 thread on the telescope-side, therefore it can be used directly at all telescopes that have a M35x0.5 thread. At the eyepiece-side there is a T2 thread and a 1.25" connection.
For example this Feather-Touch focuser can be used at all Lunt Solar Systems LS40THa and LS50THa telescopes. Please note that this Feather-Touch focuser allows very precise focusing at this telescopes, but it will not provide more back-focus than the standard helical-focuser.
Technical data:
• Length: 48mm to 65mm
• Travel: 17mm
• Diameter: 57mm
• Weight: 350g
Delivered by order:
• 1.25" Starlight-Instruments Feather-Touch focuser
| Colour: | black |
|---|---|
| Material: | Plastic |
Accessories
LUNT LS50THa/B400PT H-alpha solar telescope
€1,499.00*
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B400 blocking filter is installed inside the star diagonal. The B400 is good for visual observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B400non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB400 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
LUNT LS50THa/B600PT H-alpha solar telescope
€1,599.00*
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B600 blocking filter is installed inside the star diagonal. The B600 offers a larger field of view than the smaller B400 and is very good for visual solar observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B600non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB600 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
Similar products
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
€15.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT LS300PS Dovetail Bar 300mm (GP level)
€113.00*
This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Adapter T2 to 2", for 2" eyepieces to blocking filter
€29.00*
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
LUNT CAP Baseball Cap for sun protection
€49.00*
Always keep a cool head when observing the sun with the baseball cap from Lunt Solar Systems. The large shield shades the face well, while vents keep you cool. Made of 100% cotton, with Lunt Solar Systems logo on front.FEATURESBaseball cap with large shieldmaterial: 100% cottonprotects from sunburn while observing the sunadjustable strap with buckle in backSCOPE OF DELIVERYBaseball cap
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
€129.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT Adapter-Plate LS100FHa to 201 - 225mm Ø
€319.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557447 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT Adapter-Plate LS100FHa to 226 - 250mm Ø
€379.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 226mm to 250mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 226mm to 250mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557448 gives only the price for a complete range of different adapter-plates of 226mm to 250mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
Customers also viewed
LUNT LS18CaKMDd2 Ca-K filter in 90° star diagonal
€2,799.00*
Calcium-K module in star diagonal, for using normal astronomical telescopes up to 100mm aperture and up to 1620mm focal length as Ca-K solar telescopes.This Calcium-K module transforms your normal astronomical refractor telescope into a Ca-K solar telescope. It will be very easy: Put the Ca-K module into the 2" focuser of your telescope, and you are ready for solar observing in the light of the Calcium-K wavelength.Internal narrowband filters allow for a <2.4 Angstrom bandwidth. For refractor telescopes up to 100mm aperture and up to 1620mm focal length. For imaging it will be better to use a bigger Ca-K module.The Ca-K module is in a 90° star diagonal, for 2" focuser on the telescope side, and with T2 thread and 1.25" eyepiece connection on the eyepiece side.All needed filter parts are integrated inside the compact module. There are no additional filters needed.The Ca-K wavelength is at the edge of the visible light spectrum for human eyes, so for many people visual observing is difficult. However, all details could be captured photographically. Therefore the Ca-K Module is optimized primarily for imaging.FEATURESBandwidth <2.4 AngstromUsable at telescopes up to 100mm aperture and 1620mm focal90° star-diagonal housing2" slide tube for 2" focuserConnection for 1.25" eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYCa-K module in 90° star diagonal for 2" focuserIntegrated blocking filter B1800 for telescopes up to 1620mm focal lengthInstruction manual
%
EXPLORE SCIENTIFIC 62° LER Eyepiece 40mm Ar
€164.00*
€205.00*
(20% saved)
If a observing session is a relaxing and joyful experience is heavily dependend on the choice of eyepieces. People wearing glasses very often have the problem to see the entire field of view when they are using eyepieces with large apparent fields. This problem is now history. The new 62°- LER eyepieces by Explore Scientific do not only offer excellent image sharpness and high resolution and contrast over the full field of view - you can see that full field without problems even with glasses on. Fatigue due to tense head positioning and strained viewing simply does not happen because of the excellent viewing comfort these eyepieces provide even to observers wearing glasses. Enjoy the unique combination of excellent image sharpness out to the edge of the field even for fast optics, superior contrast and unmatched viewing comfort. Eyepieces with perfect combinations of various modern glass substrates and highest standards in manufacturing, quality control and service are a tradition at Explore Scientific - the outstanding resolution and sharpness to the very edge.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patentet EMD"-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Eye relief: 28.mm
LUNT LS50THa/B600PT H-alpha solar telescope
€1,599.00*
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B600 blocking filter is installed inside the star diagonal. The B600 offers a larger field of view than the smaller B400 and is very good for visual solar observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B600non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB600 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual