EXPLORE SCIENTIFIC 100° Ar Eyepiece 30mm (3"/76,2mm)
The 100° eyepieces from EXPLORE SCIENTIFIC convince through the unique combination of excellent edge sharpness even with fast optics and a huge field of view.
Huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods.
Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas.
This also maximizes the life of the internal coatings.
Every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.
All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
Dimensions and specifications of all eyepieces can be found in the pdf in the folder "media"
Product information "EXPLORE SCIENTIFIC 100° Ar Eyepiece 30mm (3"/76,2mm)"
These eyepieces with their huge apparent field of view not only gave the
observer a panoramic visual experience, but they relax the eye so the
observer could pay attention to subtle details for extended periods. These
ultra-wide angle eyepieces played a critical role in the military for
aiming at targets, and their long eye-relief counterparts helped reduce
eye injury from recoil. Each 100° Series Argon-Purged Waterproof
eyepiece is internally sealed and purged with inert, dry argon gas to
prevent internal fogging, to halt the intrusion of fine particulates and
fungus. This also maximizes the life of the internal coatings. To make
sure, every 100° eyepiece is tested by submerging them down to 1 meter
of water for 30 minutes. All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the BRESSER BR-LP10 lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side.
FEATURES
lens cleaning pencil for safe cleaning of optical and coated glass
brush to remove dust on one sidepolishing pad on the other side
SCOPE OF DELIVERY
1x lens cleaning pencil
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 10 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics.
The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.
All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
A new focal length joins the Explore Scientific line of inert gas-purged Waterproof Eyepieces with the 3mm 52° LER Series Eyepiece. A logical companion for the grab-and-go ED APO 80mm f/6 Air-Spaced Triplet, this eyepiece produces 160X which will perform very well with good seeing conditions on planetary objects, and to split double stars. On the ED APO 152 at f/8, 405X is achieved without the use of a Focal Extender or Barlow for those nights of near perfect seeing, with a very comfortable 15mm of eye relief. Comfort, Quality, Value. The Explore Scientific 52° LER Series Most short focal length eyepieces are excellent flat-field multi-element oculars that can transform your visual astronomy experience. With an apparent field of view of 52 degrees, these eyepieces offer incredible value in a very nice eyepiece. Expect exceptional quality and value versus a comparably priced Plossl. These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patented EMD-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.SPECIFICATIONSLarge eye distance, large field and great image sharpnessExcellent viewing position for people with glassesExcellent field sharpness even with fast optics52° apparent field of viewArgon-purging prevents internal fogging, the sealing facilitates cleaningPatented EMD-coating to maximize contrastBlackened lens edges to avoid reflexesAll eyepieces of this series are parfocalStainless steel barrel with conical security cutoffDust covers and protective bag includedSCOPE OF DELIVERY52° EyepieceDust coversProtective bag
With the introduction of the 68° Series we are pleased to make two important improvements in eyepiece manufacture, the first being 15 layer Enhanced Multi-layer Deposition (EMD™) coatings on all glass-to-air surfaces to gain maximum contrast, and waterproofing the eyepiece with the use of Argon gas purging instead of standard Nitrogen gas. Although Nitrogen is a fine choice that will last for many years, Argon is a larger molecule that maintains its protective properties over a wider range of temperatures, and is even more resistant to diffusion thereby further extending the protective waterproof environment of the eyepiece body.
Through computer-optimized design, a careful selection of optical glasses, and enhanced multi-layer deposition coatings, the Explore Scientific 68° Series™ eyepieces produce long eye-relief and ensure high image-correction, a flat field, and high contrast across the entire image field. An excellent choice for those who make extended visual studies of detail with subtle variations of brightness, and for those who must wear glasses while observing.
All 68° Series eyepieces are fully EMD (Enhanced Multi-Layer Deposition) coated and edge-blackened to produce superior contrast.
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission.
FEATURES
Push-fit Size: 31.7 mm
Apparent field of view: 50°
Eye relief: 4.5 mm
Weight: 79 g
WHAT'S INCLUDED
1x Eyepiece 8 mm (1.25'')
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission.
FEATURES
Push-fit Size: 31.7 mm
Apparent field of view: 50°
Eye relief: 11 mm
Weight: 100 g
WHAT'S INCLUDED
1x Eyepiece 15 mm (1.25'')
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
The visual effect of these new 8,5mm 82° LER eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the averted vision technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with foldable eyecups make handling and using in the field easy. As experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The patented EMD-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Comfort, Quality, Value. The Explore Scientific 82° LER Series Most short focal length eyepieces are excellent flat-field multi-element oculars that can transform your visual astronomy experience. These extreme wide field eyepieces are optimized to produce high contrast and high resolution characteristics.SPECIFICATIONSLarge eye distance, large field and great image sharpnessExcellent viewing position for people with glassesExcellent field sharpness even with fast optics82° apparent field of viewArgon-purging prevents internal fogging, the sealing facilitates cleaningPatented EMD-coating to maximize contrastBlackened lens edges to avoid reflexesAll eyepieces of this series are parfocalStainless steel barrel with conical security cutoffDust covers and protective bag includedSCOPE OF DELIVERY82° EyepieceDust coversProtective bag
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics.
The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.
All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
The Vixen NPL 4.0mm 4 Element Plossl Eyepiece 1.25" is a high power Lunar and Planetary eyepiece, most suitable for short to medium focal ratio telescopes. Its four element design gives the eyepiece a respectable field of view and excellent resolving power.
FEATURES
Size: 31.7mm
Apparent FOV: 50°
Eye Relief: 2.3mm
Weight: 70g/2.47 oz.
SCOPE OF DELIVERY
Vixen NPL 4.0mm 4 Element Plossl Eyepiece 1.25"
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The NPL20, NPL25, NPL30 and NPL40 eyepieces employ twist-up eye-guards for viewing comfort. The lenses are fully multi-coated for high light transmission.
FEATURES
Push-fit Size: 31.7 mm
Apparent field of view: 50°
Eye relief: 19.5 mm
Weight: 130 g
WHAT'S INCLUDED
1x Eyepiece 25 mm (1.25'')
BRESSER 25mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 25 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
High-performance, top-of-the-range fluorite apochromat for mobile astrophotography and observers.
Thanks to its small size and lightweight design, this high-quality fluorite refractor is ideal for excursions and air travel.
It displays razor sharp and bright stars across the entire field of view of the full-frame image sensor (95% illumination with 44 mm image circle).
The FL55SSS turns into a fast F/4.3 astrograph with the optional flattener and focal reducer.
It allows you to use extremely short exposure times and a provides a large field of view for large nebulae or comets.
Despite the small aperture, the FL55SS features a high-resolution HR eyepiece that produces stunningly clear images of the moon and the bright planets.
When used for astrophotography, it delivers razor-sharp images of stars that are guaranteed to impress.
FEATURES
Objective lenses: 55 mm fluorite
Focal length: 300 mm F5.5
Resolution and limiting magnitude: 2.11, 10.5
Light-gathering power: 62x
Dimensions and weight: 80 x 282 mm; 1.5 kg
Adapter and connections: 31.7 mm receptacle, 60 mm thread
WHAT’S INCLUDED
55 mm optical tube with fluorite APO
Dovetail adapter
Extension Tube 60 mmDew cap
Dust covers
You see better with two eyesThe BRESSER BinoViewer Deluxe makes it possible to observe astronomical objects in a relaxed way with both eyes and with considerably more detail than using one eye. The images created of the moon, planets and globular clusters are particularly impressive. But also with deep-sky objects such as the Orion Nebula the detection of details is much easier. At the same time this binoviewer is very easy to handle. Thanks to the newly patented optical system you can get into focus with any telescope. All you need is a pair of identical eyepieces to enjoy this dramatic and immersive viewing experience.How to use the BinoViewer? Since the BRESSER BinoViewer Deluxe does not require an additional light path (back focus), it can be used with any telescope - including Newtonians and short focus refracting telescopes, which traditionally suffered when using standard binoviewers. No light path corrector or similar accessory is necessary. If a standard 1.25'' eyepiece can be focused, the binoviewer will also work. The eyepiece focal length and field of view size of the eyepieces used are fully retained. As with binoculars one eyepiece is focused first using the telescope focuser. Then the second eyepiece can be brought into focus using the helical focuser on the binoviewer. The required interpupillary distance is then elegantly adjusted to a range of 58–74mm with the help of a linear sliding mechanism, with graduated marker, to help you find your ideal interocular setting quickly. Self-centring helical eyepiece grips, rather than side-mounted thumbscrew eyepiece retainers are used, decreasing the chance of offsetting collimation of both eyepiece to each other. The fact that this design of binoviewer uses a well-engineered linear slide mechanism to adjust interpupillary distance, rather than a cheaper-to-produce traditional hinged design also helps retention of collimation.Which objects can be observed with this accessory?Actually, all objects that were previously observed with the telescope in question, but only monocularly with one eye. Because there is no magnification factor at the binoviewer, even low magnifications can be achieved. This makes not only the moon, planets and globular clusters, but also the brighter deep-sky objects very interesting observation targets. The use of two eyes leads to a more relaxed view than using one eye alone. Although true depth of field viewing at infinity is a little beyond most telescopes and binoviewers, users will note how the human brain attempts to impose depth of field ("3d-like") effects on stereo views through binoviewers. The biggest difference that most observers comment upon when comparing views through binoviewers like these, as opposed to single monocular eyepiece views, is the extra detail that can be seen in most observable targets. Relaxed viewing and extra detail in objects are the two main benefits of binoviewing, which the BRESSER Bino Viewer Deluxe 1.25'' delivers in abundance.Also ideal as an accessory for solar telescopesA very special application is the use of the BRESSER BinoViewer Deluxe in combination with all solar telescopes. The spherical shape of the sun with all its surface details is shown very impressively. The depth of field effects of seeing filaments silhouetted against the solar surface are particularly enjoyable to observe.Important note: Do not use the BRESSER Binoviwer Deluxe without a suitable solar telescope or a safe solar filter in front of the telescopes objective lens . Otherwise, there is an acute risk of going blind.High-quality mechanics and materialsThe entire BRESSER BinoViewer Deluxe is made of high-quality materials. Except for the outer plastic covers all components are made of anodised aluminium. Particularly remarkable are the low-backlash sliding mechanism for adjusting the interpupillary distance and the precise rotary clamping of both eyepiece adapters. The wide clamping surface holds the eyepieces in place securely and also centres them automatically on the optical axis. The one-sided dioptric adjustment has a backlash-free helical drive and enables the finest corrections. For safe transport a high-quality hard-shell transport case is included in the scope of delivery.Which eyepieces can be used?All eyepieces with a 1.25'' barrel and a field stop of up to 22mm. Depending on the interpupillary distance the outer diameter of the eyepiece housing should not exceed a value of approximately 50 mm.Filter thread 1.25'' availableNo 2nd filter sets are necessary to operate the BRESSER Binocular Approach Deluxe. The desired colour or nebula filter can be screwed directly into the 1.25'' nosepiece. in this configuration, when changing the eyepieces to affect a change in magnification, no swapping of filters is necessary. Unique mirror-lens system with Ohara (Japan) lanthanum glass material The BRESSER Binocular Viewer Deluxe is equipped with a unique mirror-lens system. This has the advantage of higher light transmission and less color aberration. The resulting image is simply brighter and sharper. To achieve this the exclusive Ohara (Japan) lanthanum glass material has been used and in addition all optical surfaces are equipped with a full multi-layer broadband coating. Finally the beam-splitting mirror has a 99% dielectric coating and completes the excellent optical design.FEATURESEnables binocular observations with all telescopesRelaxed and comfortable viewingThree-dimensional viewing experienceSuitable for all telescopes with 1.25'' eyepiece connectionNo additional light path requiredNo magnification factor at the binocular attachmentEven low magnifications with large fields of view are achievableFor observing moon, planets and deep sky objectsPrecise and robust mechanicsSliding mechanism to adjust the interpupillary distanceDioptric compensation via fine helical driveWide eyepiece rotation clamp with automatic centeringFilter thread 1.25'' (M28.5 x 0.6mm) availableLens and mirror design made of finest Ohara (Japan) lanthanum glass materialAdvanced broadband multilayer coating on all optical surfaces99 % dielectric-coated beam-splitting mirrorHigh-quality hard-shell carrying case includedWHAT'S INCLUDEDBino Viewer DeluxeDust capsCarrying case
€439.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.