LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
- Spare part, not usable separately
- Only for LS50THa telescopes from Lunt Solar Systems
- For LS50THa/B400 and LS50THa/B600
Product number:
0558320
GTIN/EAN:
4007922072944
WEEE-Reg.-Nr.:
DE 34716369
Product information "LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes"
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMS
A rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.
After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.
Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.
FEATURES
- Inner-diameter: 31mm
- Outer-diameter: 39mm
- Cannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.
- It does not matter what blocking filter is at the LS50THa
SCOPE OF DELIVERY
- Spare part one O-ring for pressure tuner of LS50THa
| Colour: | red |
|---|---|
| Material: | Rubber |
Accessories
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT LS50THa/B400PT H-alpha solar telescope
€1,499.00*
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B400 blocking filter is installed inside the star diagonal. The B400 is good for visual observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B400non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB400 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
LUNT LS50THa/B600PT H-alpha solar telescope
€1,599.00*
A very compact, complete telescope for observing the sun in H-alpha light.The LS50THa solar telescope offers 50 mm free aperture, 350 mm focal length, and provides a bandwidth of <0.75 Angstrom. The telescope is fitted as standard with the air-pressure tuning system "Pressure-Tuner", the Etalon is safely installed inside the telescope. Prominences and surface detail can quickly be viewed spontaneously. This very portable system is an ideal travel companion for wherever you go.A B600 blocking filter is installed inside the star diagonal. The B600 offers a larger field of view than the smaller B400 and is very good for visual solar observing. Focusing is achieved by a non-roting Helical focuser.Please note that there is only a small back-focus at this telescope, therefore solar-imaging is very difficult. The LS50THa is designed for visual solar observing. We recommend for imaging the 60mm telescopes of the LS60MT series.Also double-stacking with a bandwidth of only <0.5 Angstrom is possible by using the additional available LS50C filter (0550210). This filter threads directly onto the LS50THa telescope. Double-stacking will provide much more contrast, and more details on the sun will become visible.FEATURESAperture: 50 mmFocal Length: 350 mmBandwidth: <0.75 AngstromTuning: air-pressure tuning system "Pressure-Tuner"Blocking Filter: B600non-rotating Helical focuserTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Length: 37cmWeight: 2.1kgSCOPE OF DELIVERYLS50THa H-alpha Solar TelescopeB600 Blocking Filter in star-diagonalPressure-TunerTube ring with 1/4-20 connection for mounting on photo-tripodsnon-rotating Helical focuserInstruction manual
Similar products
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
€15.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Adapter T2 to 2", for 2" eyepieces to blocking filter
€29.00*
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
LUNT Sol Searcher
€49.00*
Sol-Searcher for installing on all solar telescopes of Lunt Solar Systems. The tube rings of the LUNT solar telescopes are prepared for the mounting of this Sol-Searcher."I can't find the Sun!" sounds funny. However, the Sun is tricky to find in a properly filtered telescope, and you don't ever want to chance a direct gaze, let alone a magnified image of it.This Sol-Searcher is the safe and easy way to find the Sun. It is absolutely safe since you don't look through Sol-Searcher, you look at it. The aperture acts as a "pinhole" which projects an image of the Sun on to the 1/4" translucent "screen." This screen can be viewed from either side. Simply move your scope until the Sun's image is centered on the screen and the Sun will be in the eyepiece's field of view.The solar telescopes from Lunt Solar Systems are fitted for installing this Sol-Searcher. Only at the LS130MT and LS152THa telescopes the additionally adapter 0554302 will be needed.SCOPE OF DELIVERYTeleVue Sol-SearcherScrewsHexagon wrench
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
€129.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT B600d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
€699.00*
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B600d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d1 in 90° star-diagonal for 1.25 inch focuser
LUNT 1.25" Slide-Tube for blocking filters
€48.00*
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
LUNT Adapter-Plate LS50/60FHa to 101 - 120mm Ø
€136.00*
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 101mm to 120mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 101mm to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557412 gives only the price for a complete range of different adapter-plates of 101mm to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT Adapter-Plate LS100FHa to 226 - 250mm Ø
€379.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 226mm to 250mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 226mm to 250mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557448 gives only the price for a complete range of different adapter-plates of 226mm to 250mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
Customers also bought
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
€15.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
BRESSER Extension Tube 37,5 mm for 2.5" HEXAFOC
€19.90*
Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Customers also viewed
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems