EXPLORE SCIENTIFIC Star Diagonal Mirror 2" 99%

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

If a observing session is a relaxing and joyful experience is heavily dependend on the choice of eyepieces. People wearing glasses very often have the problem to see the entire field of view when they are using eyepieces with large apparent fields. This problem is now history. The new 62°- LER eyepieces by Explore Scientific do not only offer excellent image sharpness and high resolution and contrast over the full field of view - you can see that full field without problems even with glasses on. Fatigue due to tense head positioning and strained viewing simply does not happen because of the excellent viewing comfort these eyepieces provide even to observers wearing glasses. Enjoy the unique combination of excellent image sharpness out to the edge of the field even for fast optics, superior contrast and unmatched viewing comfort. Eyepieces with perfect combinations of various modern glass substrates and highest standards in manufacturing, quality control and service are a tradition at Explore Scientific - the outstanding resolution and sharpness to the very edge.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patentet EMD"-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Eye relief: 12mm

The Vixen flip mirror is an ingenious solution for viewing in a straight line or at a 90-degree angle. The viewing angle can be changed by turning a wheel. The main connection features a 50.8 mm barrel, which is then reduced to one of the two 31.7 mm receptacles. There is also a T2 thread for a DSLR camera when the 31.7 mm eyepiece is removed. This allows you to connect your camera directly to the telescope with an optional T2 ring. FEATURES Connection: 50.8 mm Plug-in connection Integrated T-2 thread for the camera 2 connections for 31.7 mm eyepieces Weight: 295 g DELIVERY CONTENTS 31.7 mm flip mirror Dust covers

BRESSER Star Diagonal 90 Degrees 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Star Diagonal with a 90-degree angle and a barrel diameter of 1.25 inches (31.7mm) provides comfortable and upright observations, especially at the zenith. Suitable ONLY for refractors (lens telescopes) and ideal as a spare part for the BRESSER Carbon Look Telescope series.Note: NOT suitable for reflectors (Newtonian telescopes, reflecting telescopes)!

These eyepieces with their huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods. These ultra-wide angle eyepieces played a critical role in the military for aiming at targets, and their long eye-relief counterparts helped reduce eye injury from recoil.Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

These eyepieces with their huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods. These ultra-wide angle eyepieces played a critical role in the military for aiming at targets, and their long eye-relief counterparts helped reduce eye injury from recoil.Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

An amici prism allows for a comfortable 45° viewing position and creates an erect image without left-right reversal. This makes it especially suitable for nature observations but it can also be very helpful with astronomical observations. Particularly beginners may find it easier to orientate in the sky when they compare the view through the telescope with what they can see with their naked eyes.With this  amici prism an astronomical telescope can be used as a powerful spotting scope.Suitable for Maksutov-Cassegrain style telescopes with threaded M35x1mm visual back adapter:item no.: 4701102 BRESSER MESSIER MCX-102 GoTo Telescope AZ/EQitem no.: 4701127 BRESSER MESSIER MCX-127 GoTo Telescope AZ/EQitem no.: 4890125 BRESSER MESSIER MC-90/1250 optical tubeitem no.: 4810140 BRESSER MESSIER MC-100/1400 optical tubeitem no.: 4827190 BRESSER MESSIER MC-127/1900 optical tubeFEATURESfits to BRESSER MESSIER MCX/MC telescopescomfortable eye relief for refractor telescopes45°- viewing position and image without left-right reversalastronomical telescope turns to a powerful spotting scopefor use with 1.25'' (31:7mm) eyepiecesSCOPE OF DELIVERY45° Amici Prism M35x1mm to 1.25''/31.7mm

This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty. Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw. As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes. FEATURES Nosepiece diameter: 1.25” / 31.7 mm Weight: 124g Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal Protective dust caps