The Pulser enables the setting of a flashing frequency of the projected graduated circuits. This improves the detection of faint objects, because the overlap with the graduated circuits is removed according to the flashing frequency.
FEATURES
TELRAD Pulser for illumination unit
Enables setting of a flashing frequency of the projected graduated circuits
The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope
A new take on a classic design, superior to the usual red dot finder - which will fit many telescopes and larger binoculars.Explore Scientific ReflexSight™ LED projection viewfinder, uses proven functionality with versatility, while having enhanced performance features.Looking through this viewfinder shows multiple deep red target circles projected against the night sky. Both eyes can be used for quick and easy star hopping, in order to target objects in your telescope. The big advantage is that you can see the entire night sky without magnification and not just a small section of the sky, as you would through a magnified finderscope. This makes Goto aligning quick and easy and speeds up acquisition of targets.New "Multi-Dot" target circle pattern (in standard circle diameters of 4.0 degrees, 2.0 degrees and 0.5 degrees), prevents blocking of stars within the field of view. Using the widths of the projected circles as reference points allows those users with non-goto telescopes to easily work out the location of non-visible targets, with reference to more easily visible stars. The projection screen size is a generous 55 x 35 mm.Multiple mounting options. The Explore Scientific ReflexSight™ LED projection viewfinder's base fits standard "Vixen-style dovetail" finder bases, allowing the user to attach this finder to a wife array of commercially-available telescopes, without modifying the telescope itself. A ¼ inch x 20G threaded adapter (photo tripod thread) is built into the finder base, allowing the finder to be attached to a variety of telescopes, via piggyback camera adapters with a photo tripod threaded hole.Functional design and intuitive use: the smooth housing, with no sharp corners, prevents snagging. Easily accessible battery compartment, taking 2x standard AAA alkaline batteries (not included), which power the frugal LED illuminator. The low power consumption of the LED lighting ensures a long operating time. Large, continuously adjustable brightness control with knurled knob head can be easily operated with gloves. Click the rotary switch to turn off completely. Rear-facing, tool-free three-point parallax knurled collimation knobs, again, easy to operate even with gloved hands, ensure you are well locked-on to the main optical axis of your telescope. The projection screen is coated, to minimise annoying reflections and allow you to concentrate on the finder's target and the night sky behind it. Comes complete with screen and optics cover. The extremely compact design allows mounting even on small, lightweight telescopes - truly a finder for all!FEATURESReflexSight LED projection finder with deep red target circles Standard circle diameters 4.0 degrees, 2.0 degrees and 0.5 degreesProjection screen size: 55 x 35 mmFits standard Vixen-style dovetail finder shoes There is also a ¼ inch x 20G female photo tripod thread in the base Can be mounted via piggyback camera adapters etc. Operates on standard AAA batteries (not included) Smooth housing with no sharp corners, prevents snagging Comes complete with optics and screen cover Compact design and easily accessible battery compartment Large, continuously adjustable brightness control with knurled knob Click switch to turn off completely Tool-free three-point collimation parallax adjustment with easily accessible knurled knobs Can also be mounted on small and light telescopes WHAT'S INCLUDEDReflexSight LED projection finder
The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting
This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe.
FEATURES
Compass Oil-filled compass
Azimuth dimensions: 1° steps
Height adjustment: 5° steps (max. +/- 70°)
Markings: marked with luminous paint
Spirit level: Built-in spirit level
DELIVERY CONTENTS
QPL compass
If you want to use your TELRAD viewfinder with several telescopes, simply use this extra base plate with quick-release function.SCOPE OF DELIEVERYone extra Base plateAdhasive tape
Red polar viewfinder illumination unit for BRESSER EXOS-2 mounts with fixing thread M8x0.75mm. An adjustable illumination makes it easier to find the marked sky objects on the polar viewfinder.IMPORTANT NOTEPlease verify the type of fixing thread prior to your purchase. We offer two different sizes: 12mm (part No. 4964211 for older EXOS-2 mounts) and 8mm (part No. 4964212 for newer EXOS-2 mounts)FEARTURESRetrofittable red pole finder illumination for BRESSER EXOS-2Illuminates the graticule in the viewfinderMakes it easier to find the celestial objectsAlso for 4900850 BRESSER 8x50 viewfinder as spare partAlso for Explore Scientific 8x50 viewfinders as spare partSCOPE OF DELIVERYPolar Viewfinder Illumination unit for EXOS-2Fixing thread M8x0.75mm
The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope
Thanks to the large aperture of 50 mm, the Vixen 7x50 finder scope immediately reveals many objects that are not visible in smaller viewfinders. This makes it easy to adjust the telescope to the target object. The red illumination of the finder scope can be dimmed to different levels.The eyepiece is detachable (31.7 mm diameter) so that a CMOS camera with 31.7 mm diameter (available separately) can be attached and used as an autoguider. The eyepiece unit with crosshairs is also removable in order to use 31.7 mm diameter eyepieces (sold separately) with different focal lengths. This allows the finder scope to be operated with various magnifications.The lens is designed to be compatible with CMOS cameras. The distance between the bottom of the 31.7 mm sleeve on the camera side and the sensor surface should be approximately 17 mm. However, the focus position may vary depending on the camera, so you should adjust the guiding camera for focus before use. The focus of the optics is adjusted by rotating the lens. First, the black lock ring on the main optics must be loosened. Then, the focus can be adjusted by turning the lens mount. Please also read the operating instructions for the viewfinder and the CMOS camera used.If the focus of the viewfinder has been adjusted, the focus position must be readjusted when using the eyepiece unit.FEATURESMagnification: 7xAperture: 50 mmLenses: coatedCrosshairs: illuminated in red, dimmableDimensions: 220 mm × Ø 58 mmWeight: 467 gSCOPE OF DELIVERY7x50 viewfinderEyepiece unit with illuminationCR2032 batteryInstruction manual
Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces.
This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.
Vixen finder shoe for attaching a Vixen-profile finder bracket to your telescope (also works with many other finder brackets).PROPERTIESVixen standard connectionFixing with two screwsWHAT'S INCLUDEDVixen finder shoeFastening screws
Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60
viewfinder telescope with removable eyepiece unit and crosshairs with
adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25
inch /31.7mm plug-in connection, as well as the T2 camera connection
thread (M42x0.75mm), allow the autoguiding required for long time
exposure to obtain a point-shaped star image. It can also be used as a
mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage
sharpness and viewing characteristics lift this viewfinder well above
the level of the usual 10x60 viewfinder scopes. The visible image is
bright and crisply sharp. Furthermore, this viewfinder has a very large
field of view (FOV) of 6.0 degrees. This makes finding and adjusting
objects much easier. The existing scale markings (pitch=0.85 degree) on the
crosshair are a good reference for estimating distances, and the open
centre markings also make it easier to centre objects precisely. All
lens surfaces are protected against weathering by multi-coating and
guarantee a bright viewfinder image due to the high light transmission
values. The adjustable red LED illumination unit is powered by two LR41
coin batteries. The main lens and the crosshairs can be focused
independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne
of the main applications for this telescope is the so-called
autoguiding. Here the usually larger photo-taking optics are actively
corrected by a smaller guiding telescope with a second tracking camera.
This means that the mechanical fluctuations in the tracking accuracy,
which are present in all astronomical telescope mounts, are measured by
the tracking camera and compensated accordingly. This is necessary in
order to obtain a point-shaped star image on the astrophotos during long
time exposures and to avoid unwanted star trails. For this purpose, the
guiding telescope is inserted into the existing viewfinder shoe of the
photo-taking optics and aligned parallel. If the existing viewfinder
shoe is not compatible, a suitable viewfinder shoe is also included.
With the 1.25 inch / 31,7mm plug connection at the rear end or via T2
thread connection (M42x0,75mm), a tracking camera can be mounted
afterwards. This is held securely by a brass ring clamp and 3 clamping
screws. Please note the required back focus for your tracking camera.
The focal plane (backfocus) is approx. 22mm behind the T2 thread. The
sensitive focusing on the guiding star is done by a large knurled wheel
of the mechanically precise manufactured helical focuser. For easy
reproduction of the point of focus, this has a white millimetre scale
from 0 to 28mm, which is attached by laser engraving. After the tracking
camera has been connected directly or via computer to the telescope
mount and the necessary basic settings have been made, the first
astrophotos with long time exposure can be taken.Use as mini travel telescopeThis
viewfinder and guide telescope can also be used quite simply as a mini
travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to
26mm and 1.25 inch/31.7mm plug connection are suitable. Especially
recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art.
02195xx) and 62 degree (02196xx) LER series. Note: Only straight view
use is possible.Metal viewfinder holder and viewfinder shoeThe
mount of this viewfinder and guide telescope is completely made of
aluminium and is a stable base. The viewfinder mount is suitable for
many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER
MESSIER etc. If the existing viewfinder shoe is not compatible, a
matching viewfinder shoe is also included. This can be attached to the
telescopic tube by means of four M5 screws. The bore distances of the
viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The
six large adjustment screws with non-slip knurling make it easy to align
the viewfinder, even with clammy fingers. All adjusting and clamping
screws have plastic tips that effectively prevent the viewfinder housing
and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual
BRESSER Messier 8x50 Viewing finder scope with mount and integrated illumination. Finder slot included.FEATUREShigh-quality workmanshipintegrated illuminationeyepiece with reticleSCOPE OF DELIVERYviewfindermountviewfinder shoeprotective caps
The Vixen Viewfinder 7x50, with illuminated reticule is an exceptionally high quality optical finder scope, featuring 50 mm Achromatic objective. The internal crosshairs are accurately inscribed and can be illuminated with a battery-powered LED attachment, which can be varied in brightness to the user's requirements. This finder gives a field of view of 7.2° in the night sky.
Please note: this finder does not come with a bracket, but will fit numerous standard finder brackets - the X000288 Vixen S 50 mm finder scope short holder, or the X000073 Vixen XY finder scope long holder are particularly recommended.
FEATURES
Finder with 50 mm achromatic optics
Field of view: 7.2°
Battery: CR2032
Dimensions: 218x53 mm
Weight: 0.375 kg
WHAT'S INCLUDED:
Viewfinder 7x50, with illuminated reticule
Smart Telescope for Everyone: Easy Access to the Night Sky
Reach for the stars with the ZWO Seestar S50 Smart Telescope. This innovative, smart apochromat combines high-quality optics and smart technology with incredible ease of use! Imagine sitting relaxed on your terrace, a glass of wine in hand, while the Seestar S50 explores the vast expanses of the universe for you and sends real-time images to your smartphone or tablet.
Astronomy from the Comfort of Your Couch
Simply choose your desired object from the countless galaxies and nebulae available in the star catalog of the intuitive app. The ZWO Seestar S50 Smart Telescope will automatically move to the selected object. The all-rounder automatically focuses on the celestial object before beginning the capture and sends real-time images to your smartphone or tablet. The smart telescope independently sets the optimal camera settings such as exposure time, ISO value, or aperture.
High-Quality Optics Meets Smart Technology
The high-quality apochromat refractor optics of the Seestar S50 ensure exceptionally clear and color-accurate images. The combination of top-notch optics, advanced automatic star recognition, and effective GoTo functionality makes this smart telescope a powerful instrument for night observation and astrophotography – accessible to everyone! The integrated camera supports high resolutions that capture even the finest details in distant galaxies and nebulae.
Focus on the Essentials
The Seestar S50 features an integrated filter change mechanism that can be controlled via the app. By default, the UV/IR-CUT filter is used, eliminating unwanted infrared and ultraviolet light while allowing the crucial H-alpha emission nebula band for astronomical photography to pass through. This results in more contrast-rich images of many deep-sky objects.
Automatic Image Stacking for Razor-Sharp Shots
The Seestar S50 uses the stacking method for creating astrophotos. Multiple individual images are combined or "stacked" in real-time to form a new image. The final image becomes sharper and more detailed as more individual images are combined. Experience how a galaxy millions of light-years away takes shape before your eyes, revealing more details with each passing minute. The result is exceptionally clear images that reveal the depths of space with impressive detail.
For Stacking Pros Too
Already familiar with stacking and prefer to do the image processing yourself? No problem – the Seestar saves each individual image in RAW format in its internal storage on request.
Also a Master of Observation During the Day
Not only stars and galaxies at night, but the Seestar S50 also offers fascinating observation possibilities during the day. Create landscape images and safely observe the sun with the included solar filter, marveling at its impressive sunspots. The S50 is a true all-rounder for any time of day or night.
Share Your Discoveries
The Seestar S50 makes it easy to quickly and easily share your astrophotographic achievements with friends or the astronomy community. With just a few clicks, you can publish your images directly from the app on social networks. Whether capturing fascinating lunar craters, glowing nebulae, or colorful galaxies – share your observations and inspire others with your discoveries!
FEATURES
Optic Type: Apochromat Refractor
Automatic image stacking for enhanced sharpness and detail without extensive PC post-processing
Smart telescope with fully automatic alignment and tracking
Telescope for night and solar observation as well as landscapes
Operation via an intuitive app (iOS/Android)
Live-view observation and photography in real-time
Compact and lightweight design for maximum mobility
Integrated Wi-Fi function
High optical resolution for sharp and detailed astrophotography
SCOPE OF DELIVERY
ZWO Seestar S50 Smart Telescope
Integrated camera for high-resolution astrophotography
Solar filter for safe daytime observations
Carbon tripod
Carrying case
USB-C charging cable (power adapter not included)
User manual
Access data to the extensive star and galaxy catalog app
Capturing beautiful moments with your SLR camera on a photo is sometimes limited when it comes to long distances. Simply connect your SLR camera to your scope with this Photoadapter and benefit from the high magnification of the scope to overcome this problem and capture the smallest details on photo.
Inner diameter: 40-54mm
Inside dimension Length: 68 - 81mm
All you need is your camera, a spotting scope of the Dachstein or Prisch Gen II series and this photo adapter as well as the matching T2 ring for your camera and the fun can start.
Suitable for:
BRESSER Pirsch Gen II spotting scopes
BRESSER Dachstein spotting scopes
BRESSER Condor Gen II spotting scopes
BRESSER 15-45x60 Spektar spotting scope
Spotting scopes of other brands
Optical pole finder scope for fast and precise polar alignment of the BRESSER EXOS-1 EQ mount (part No. 4964200). The BRESSER Polar Viewfinder is used with the BRESSER EXOS-1 EQ mount enabling high precision alignment to the celestial pole by using the illuminated reticle and star constellation markings. Simply adjust the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - that's it. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for BRESSER EXOS-1 EQ mountIlluminated crosshairs and constellation markings Quick and easy to use SCOPE OF DELIVERYPolar Viewfinder EXOS-1Mounting material Instruction manual
€78.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.