LUNT LS40THa/B500 H-alpha solar telescope

40mm solar telescope for easy and affordable starting into observation of prominences & more

Special telescope for observing the sun
Absolutely safe, no danger to the eyes
Shows prominences & more details on the sun
Easy to use, well suited for beginners
For visual sun observation
Bandwidth less than 0.7 Angstrom
Small B500 blocking-filter

€1,398.00*

Prices include VAT. Shipping costs not included

Notify me when the item is available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions. *

Product number: 0551145

GTIN/EAN: 4007922069371

WEEE-Reg.-Nr.: DE 34716369

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners— but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Introduction to Astronomy

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Introduction to Astronomy

The View of the Starry Sky

Foundations of Celestial Mechanics

Telescopes - Optics and Mechanics

Product information "LUNT LS40THa/B500 H-alpha solar telescope"

Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.

Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B500 blocking-filter, and Helical focuser.

The LS40THa/B500 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.
Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B500, this is good for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.

The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.

The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.

FEATURES

Aperture: 40mm (no central obstruction, 2-lens refractor)
Focal length: 400mm
Bandwidth: <0.7 Angstrom
Tuning: mechanical tilt-tuning
Blocking filter: B500 with 1.25 inch connection
Focuser: Helical focuser
Dovetail bar at standard GP-level
1/4-20 tapped base (standard thread for photo-tripods)
Sol-Searcher included
Weight: 1.2kg
Length: 41cm

SCOPE OF DELIVERY

LS40THa Solar Telescope
B500 blocking filter in star-diagonal housing
1.25 inch Helical focuser
Dovetail bar (GP level)
Sol-Searcher
Instruction manual

Colour:	white
Focusing system:	1.25" Helical focuser
Material:	Aluminium
Mount Type [Telescopes]:	Optics without Mount
Telescope filter type:	Solar Filter H-Alpha

Manual_LS40THa_en_LUNT-SOL_v062021a.pdf

Manual_LS40THa_de_LUNT-SOL_v062021a.pdf

Manual_LS40THa_es.pdf

Manual_LS40THa_fr.pdf

Accessories

LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm

Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

€299.00*

Details

BRESSER Twilight I telescope mount with tripod

The Twilight I is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the BRESSER Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder. Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERYTwilight I Telescope MountStainless Steel Field tripod

€299.00*

BRESSER Messier EXOS 1/EQ-4 Mount

Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES Stable parallactic mount with fine drive in both axes Circular bubble level for easy horizontal alignment Stable height-adjustable stainless steel tripod Retrofittable with a tracking motor for the right ascension axis Pole height scale for setting the latitude Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software Tripod weight: 4.7 kg Mount weight: 4 kg (without counterweight) Total weight incl. counterweight: 13.2 kg SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight

€329.00*

LUNT HAT solar hat with neck flap

Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap

€59.00*

Details

LUNT Heating Module for Blocking-Filter

At very cold temperatures, blocking filters may no longer work accurately central in the H-alpha wavelength, which means that the details on the sun become less visible. With this Heating-Module you can counteract this effect and observe the sun in the H-Alpha line optimally even at cold temperatures.The Heating-Module is for use with blocking filters in 90° star-diagonal housing from Lunt Solar Systems. It cannot be used at blocking filters in straight extension tube.The Heating-Module has an internal battery which allows for about 1 to 1.5 hours of operation. The battery can be recharged with the supplied USB cable.FEATURESAllows optimal observations in the H-alpha line even at very cold temperatures with blocking filters from Lunt Solar SystemsOperating time about 1 to 1.5 hoursInternal battery can be charged via USB cableCan also be used as a portable charger to power small electronic devicesInput (IN): 5V 2AOutput (OUT): 5V 2ACapacity: 5000mAhSCOPE OF DELIVERYLSBHEATER Heating-Module for Blocking-FiltersMounting screwsHexagon wrenchUSB cableInstruction manual(Blocking-filter not included!)

€399.00*

LUNT Transport Case for LS50THa and LS40THa

This transport case is suitable for all 50mm telescopes of the LS50THa series, and also for all 40mm telescopes of the LS40THa series.Foam not included! The foam of the LS50THa or LS40THa telescope boxes falls into place to this transport case.FEATURESTransport case dimensions: 48 x 28 x 18 cmSCOPE OF DELIVERYTransport Case for LS50THa and LS40THa telescopes(Telescope and foam not included!)

€139.00*

Details

1,25‘‘ Feather-Touch Focuser

Starlight-Instruments Feather-Touch focuser for very precise focusing.This Feather-Touch focuser allows very fine and precise focusing. The Feather-Touch focuser provides a M35x0.5 thread on the telescope-side, therefore it can be used directly at all telescopes that have a M35x0.5 thread. At the eyepiece-side there is a T2 thread and a 1.25" connection.For example this Feather-Touch focuser can be used at all Lunt Solar Systems LS40THa and LS50THa telescopes. Please note that this Feather-Touch focuser allows very precise focusing at this telescopes, but it will not provide more back-focus than the standard helical-focuser.Technical data:• Length: 48mm to 65mm• Travel: 17mm• Diameter: 57mm• Weight: 350gDelivered by order:• 1.25" Starlight-Instruments Feather-Touch focuser

€498.00*

Details

LUNT LS40FHa H-alpha double-stack filter for LS40THa

Double-stack filter for LS40THa telescopes. The bandwidth of H-alpha systems can be reduced by so-called "double-stacking". A smaller bandwidth provides much more contrast at the solar surface, thereby many more details will become visible. Double-stacking with a bandwidth of only <0.55 Angstrom is also possible at the LS40THa telescopes. Therefore Lunt Solar Systems has especially designed this LS40FHa double-stack filter in compact housing. FEATURES Aperture: 40 mm Bandwidth: <0.55 Angstrom Tuning: mechanical tilt-tuning Housing diameter: 70mm Length: 60mm Weight: 0,3kg only usable together with a LS40THa telescope! SCOPE OF DELIVERY LS40THa H-alpha double-stack filter Instruction manual

€998.00*

Similar products

LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters

Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters

€15.00*

LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€5.00*

LUNT Solar Eclipse Glasses (5 pieces)

Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)

€16.90*

LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes

Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

€5.00*

LUNT Solar Eclipse Glasses (1 piece)

Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters. FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage 100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)

€5.90*

LUNT Grease for Pressure-Tuner at MT & THa solar telescopes

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

€2.50*

Details

EXPLORE SCIENTIFIC Solarix Solar Filter Film A4

Explore Scientific Solarix Solar Filter Film.Watch Solar Eclipses, Sun Spots, Planet Transits, crossing aircrafts and satellites.Suitable for making your individual solar filter for telescopes, binoculars, photo- and video cameras.New developed solar filter film that has the optical quality of the glass with the advantages of impregnated polymer.Collateral protection by using impregnated polymer and additional filter coated surface.Creates a very natural and yellow solar image.Also qualified for high magnifications.Consistent brightness and even density with any aperture.Ideal for visual observing and photographic use.Light weight and does not require re-balancing tube assembly.Flat surface compared to other thin film filters that have wrinkles and creases.Resistant against any damage.Construction manual included for making your individual solar filter and eclipse glasses.100% safeSpecifications:Material thickness: 0.05mm Optical density: 5Optical transmission: 1/1000 of 1% (99.999% incoming light blocked)Dimension: A4 - 210 x 297mmSCOPE OF DELIVERYSolar Filter Film, A4 sizeHard carton stencil for cutting out a telescope filter holder and eclipse glassesContruction- and Instruction manual Additional materials which need to be purchased separately:Double sided gluing tape.Universal adhessive glue.Paper scissor.

€19.90*

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 9"- 10" SC Telescopes

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 203mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 203mmFits to outer telescope tube diameter from 200 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€59.90*

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 80-102mm Telescopes

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€25.90*

Adapter T2 to 2", for 2" eyepieces to blocking filter

Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)

€29.00*

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 110-130mm Telescopes

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 114mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 114mmFits to outer telescope tube diameter from 110 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€31.90*

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 150-160mm Newtonians

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 127mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 127mmFits to outer telescope tube diameter from 150 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

€41.90*

Customers also viewed

Refurbished

PULSAR DOMES 2.7 METRE OBSERVATORY FULL HEIGHT (Refurbished)

HINWEIS: Es handelt sich bei diesem Artikel um Gebrauchtware bzw. Rückläufer. Das bedeutet: Der Artikel kann leichte Gebrauchsspuren aufweisen und die Verpackung kann von der Originalverpackung abweichen. Bitte beachten Sie, dass für Refurbished Artikel generell 12 Monate Garantie gelten.Die PULSAR Sternwartenkuppel bietet eine hohe Fertigungsqualität zu einem sehr günstigen Preis. Ein hervorragender und praktischer Wetterschutz für Sie und Ihr Teleskop-Equipment. Es ermöglicht jederzeit eine schnelle Einsatzbereitschaft. Egal ob Sie fotografieren oder visuell beobachten, die Gewissheit seine Ausrüstung permanent startklar zu haben, trägt maßgeblich dazu bei den Sternenhimmel erfolgreich und mit Freude zu erkunden. Ideal zur Aufnahme von Teleskopen mit bis zu 16" (40cm) Öffnungsdurchmesser und diversen Zubehör. Sehr gut geeignet für Institute, Vereine und Schulen. Die PULSAR Sternwartenkuppel wird in mehreren Einzelsegmenten und mit allen erforderlichen Montagematerialien geliefert. Die Selbstmontage ist für geübte Heimwerker kein Problem. Alternativ bieten wir auch einen kompletten Aufbauservice für Sie an. Bei Fragen hierzu nehmen Sie bitte Kontakt mit uns auf. Die 2,7 Meter Pulsar Sternwartenkuppel bietet eine Menge Vorteile gegenüber einfachen Schutzbauten. EIGENSCHAFTENBeste Fertigungsqualität aus EnglandDauerhaft wetterbeständiges GFK MaterialHohe Abweisung von WärmestrahlungStabiler Schließmechnismus Einfaches und passgenaues DesignSelbstmontage oder Aufbauservice auf Anfrage Motorgesteuerte Rotation als optionales Zubehör erhältlich Motorgesteuerter Kuppelspalt als optionales Zubehör erhältlichAutomatikbetrieb über Internet möglichIntegrierte Stauräume (Bay) als optionales Zubehör erhältlichVerfügbar in weiß - weitere Farben z.B. grün auf AnfrageAbmessungen: Höhe 2.7 Meter, Durchmesser 2,7 MeterTürhöhe 1,1 Meter, Spaltweite 0,7 Meter Erforderliche Vorarbeiten seitens des Kunden:Als Basis für die Sternwartenkuppel müssen Sie eine ebene und ausreichend dimensionierte Plattform (Betonplatte) anfertigen. Unsere Anleitung stellt Ihnen ein Beispiel für solch eine Plattform bereit. Darüber hinaus bieten wir diverse Variationen der Kuppeln sowie passendes Zubehör an. Die 2,7 Meter PULSAR Sternwartenkuppel ist in weiß lieferbar - andere Farben z.B. grün auf Anfrage. Eine passende Teleskopsäule aus pulverbeschichteten Stahl und passendes Installationsmaterial komplettiert die zur permanenten Installation erforderlichen Materialien. Durch die Verwendung unserer Teleskopsäule sparen Sie Platz und haben deutlich mehr Bewegungsfreiraum innerhalb der Kuppel als mit einem Dreibeinstativ. Auf Kundenwunsch fertigen wir zusätzlich zu der standard Teleskopsäule auch abweichende Ausführungen an. Sprechen Sie uns einfach an. VIDEO: https://www.pulsarastro.com/video-guides-27-w.aspFAQ: https://www.pulsarastro.com/faqs-28-w.aspKundenmeinung: Philippe R. (Frankreich):2 years ago, I purchased from you a 2.7 m dome fully motorized settled in my backyard in the region of X. You shall be happy to know that I am very satisfied with this product which is reliable for operating in a remote control mode . The dome hosts a Ritchey Chretien Telescope or alternatively an refractor astrograph used mainly for deep sky imaging I let you inform Pulsar Dome. https://www.astrobin.com/search/?q=cpafobin Wichtige Hinweise:Dieser Artikel kann nicht online bestellt werden, sondern nur nach telefonischer oder schriftlicher Absprache. Bei Auftragserteilung bekommen Sie einen separaten Kaufvertrag zugesandt.Die Lieferung erfolgt ausschließlich per Spedition. Lieferkosten sind abhängig von der Lieferadresse. Bitte erfragen Sie diese per e-Mail unter orders.shop@bresser.de oder rufen Sie uns an unter +49 2872 8074 300.Lieferung sofort ab Lager Deutschland oder bei Sonderbestellungen ca. 6-8 Wochen. Sparen Sie bares Geld ! Der sichere Transport von PULSAR Kuppeln erfolgt auf übergroßen speziell gefertigten Paletten mit Sondermaß, die den Transport per Spedition schnell teuer werden lassen. Daher wäre für alle Kunden auch eine Selbstabholung einer PULSAR Kuppel mit eigenem Transporter oder Anhänger nach Absprache ab Lager BRESSER GmbH Rhede/Westfalen, GERMANY möglich.

€8,190.00*

LUNT Heating Module for Blocking-Filter

€399.00*

BRESSER Super Ploessl Eyepiece (1.25") 26mm

The new BRESSER Super Plössl Eyepiece in a 4 lens design provides good edge definition in a great field of view and a convenient eye relief. The high-grade coating prevents reflections efficiently. Every eyepiece is equipped with rubber eyecups.FEATURESPremium grade optical glassIndividually tuned, multi-layered coatings for maxim Lens edges and all internal metal surfaces are blackened to maximize image -contrast um light transmissionParfocal - little or no refocusing required when switching eyepiecesLong eye reliefAdjustable rubber eyeguards

€29.00*

LUNT LS40THa/B1200 H-alpha solar telescope

Solar observation in H-Alpha: prominences, filaments, flares ... the most spectacular way to see the Sun - easy and affordable with the LS40THa.Complete H-alpha solar telescope with 40mm aperture, <0.7 Angstrom bandwidth, B1200 blocking-filter, and Helical focuser.The LS40THa/B1200 is a complete telescope for observing the sun in H-alpha, with 40mm aperture (no central obstruction) and 400mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An Etalon with mechanical tilt-tuning provides <0.7 Angstrom bandwidth.Fine adjustment is achieved with a 1.25 inch Helical focuser. Blocking-filter is the B1200, this is excellent for visual observation of the sun. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepiece connection.The easy handling makes this telescope ideal for starting H-Alpha solar observation. Due to its compact dimensions it is also a good travel telescope for the experienced solar observers.The LS40THa telescopes are available with choice of B500, B600 or B1200 blocking filters. The larger blocking filters provide less edge obstruction and a larger field of view for visual observation and photography. Please note that these telescopes have only a very small back focus and therefore photography is difficult. We recommend special astro cameras for photography, which have a very short distance to the sensor, such as the BRESSER Full HD camera item number 4959050.FEATURESAperture: 40mm (no central obstruction, 2-lens refractor)Focal length: 400mmBandwidth: <0.7 AngstromTuning: mechanical tilt-tuningBlocking filter: B1200 with 1.25 inch connectionFocuser: Helical focuserDovetail bar at standard GP-level1/4-20 tapped base (standard thread for photo-tripods)Sol-Searcher includedWeight: 1.2kgLength: 41cmSCOPE OF DELIVERYLS40THa Solar TelescopeB1200 blocking filter in star-diagonal housing1.25 inch Helical focuserDovetail bar (GP level)Sol-SearcherInstruction manual

€1,998.00*

Details

LUNT LS1.25HW 31.7mm (1.25'') Herschel Wedge

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result. Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 150mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

€229.00*